383-410-430-462 Mercury Edsel Lincoln and Thunderbird crate engines

For less expensive engines why not think about rebuilding your engine?
See our engine rebuilding page!

These prices are with our provided certified Cores!


stage 1 $7500 High Performance crate engine     Breakin test run included

430cid 200-225hp 420tq stock    250-270hp 440tq stage 1
462cid 260hp 440tq stock                   280hp 470tq stage 1
Block baked, blasted, crack checked and pressure tested,
sonic tested bores, block bored and honed, original camshaft cleaned and checked,
new cam bearings new freeze plugs, heads baked, blasted and cracked checked,
performance valve job guides checked and replaced as needed, valves reground
as needed, springs replaced, new valve seals, stock retainers
and locks, rods cleaned, crank polished and cleaned, new lifters, stock rockers
system cleaned, stock pushrods cleaned, new
cast pistons to suit 93 octane
   
  new rings set, new HD timing chain and gears, 2 barrel intake cleaned
and painted,
valve covers cleaned and painted, rebuilt water pump,
oil pan cleaned and painted,
new oil pump, new rod and main bearings, 
  100% blueprinted and run with house distributor, carb and plug wires.    

 

 

stage 2 $9000 crate engine     Breakin test run included

430cid 350hp 460tq
462cid 390hp 520tq

Same as above but with these differences!
New hydraulic roller camshaft and lifters, full roller rockers and custom pushrods,
new rod bolts, 4 barrel intake

  100% blueprinted and run with house distributor, carb and plug wires.

 

stage 3 $10500 crate engine   Breakin test run included

430cid 390hp 480tq
462cid 420hp 540tq
Hydraulic Roller camshaft
Same as above but with these differences!
Mild ported heads, new performance camshaft, over sized valves
100% blueprinted and run with house distributor, carb and plug wires.

 

Stage 4 $11100 crate engine     Breakin test run included

430cid 410hp 490tq
462cid 440hp 540tq

Hydraulic Roller camshaft
   Same as above but with these differences!
More porting on heads and mild porting on intake
100% blueprinted and run with house distributor, carb and plug wires.

 

Stage 5 stroker crate engine $13800   Breakin test run included

430 and 462 blocks making 530-552cid will make
450-550hp and 600-680tq depending on application designed for
Hydraulic Roller camshaft
Same as above but with these differences!
Stroker crankshaft, forged rods and forged pistons, performance
ring set, stainless oversized valves
100% blueprinted and run with house distributor, carb and plug wires.

email us for custom quote

We also offer:

 

All MEL engine prices now include complete engine breakin standard!

 

Finishing kit: Electronic Distributor module, Quickfuel Carb, Spark plugs and wires.
Starting at $650

 

Basic dyno tune $400.

Holley Sniper EFI starting at $1300 installed