383 410 430 462 Engine rebuilding
Mercury Edsel Lincoln Thunderbird

                           All engines below require a core!

 

stage 1 rebuild $5800 Breakin test run included
430cid 200-225hp 420tq stock       our stage 1 250-270hp 440tq
462cid 260hp 440tq stock               our stage 1 280hp 470tq
Your block baked blasted crack checked and pressure tested, Sonic tested bores,
Block bored and honed, new cam bearings, new freeze plugs, your heads baked, blasted and cracked checked, 
performance valve job, guides checked and replaced as needed $15 each or seats $25 each
your valves reground, your springs replaced as needed, new valve seals, your retainers and locks
your rods cleaned and inspected, your crank polished if needed, your camshaft cleaned and inspected new lifters, your rockers system disassembled and cleaned, your pushrods cleaned,
n
ew cast pistons to suit 91-93 octane,
new rings set, new HD timing chain and gears 
your intake cleaned and painted, your distributor cleaned, your valve covers cleaned and painted 
rebuilt water pump, your oil pan cleaned and painted, New oil pump, new rod and main bearings
100% blueprinted

stage 2 rebuild $6800 Breakin test run included
430cid 300hp 440tq
462cid 320hp 500tq

This engine has everything from the above engine with addition to the following upgrades:
   New cam and lifters, Full roller rockers, Custom aftermarket pushrods, New rod bolts.

stage 3 rebuild $8400 Breakin test run included
430cid 360hp 470tq
462cid 400hp 520tq

This engine has everything from the above engine with addition to the following upgrades:
Mild ported heads, Over sized valves, Performance camshaft.

stage 4 rebuild $9000 Breakin test run included
430cid 380hp 480tq
462cid 420hp 520tq

This engine has everything from the above engine with addition to the following upgrades:
Heavily ported heads, Mildly ported intake.

Stage 5 stroker $11700 Breakin test run included
430 and 462 blocks can produce 530-552cid
They are capable of making 450-550hp 600-680tq depending on application

This engine has everything fro the above engine with addition to the following upgrades:
Stainless steel over sized valves, stroker crankshaft, forged pistons and rods, performance rings.

email us for custom quote

 

We also offer:

Hydraulic Roller camshaft Upgrades add $1000

All MEL engine prices now include complete engine breakin standard!

Finishing kit: Electronic Distributor module, Quickfuel Carb, Spark plugs and wires.
Starting at $650

Basic dyno tune $400

Holley Sniper injection starting at $1200 installed